Tilley Endurables T4MO-1 Hiker's Hat
Tilley Endurables' sun-protective Hiker's Hat is designed with an evaporative cooling insert, powered by HyperKewl™, to help relieve heat stress during treks. A rear brim loop provides a place to securely clip your Hat in place when not in use. These unique features, plus all the usual Tilley® Hat benefits make this the ultimate Hat for the trail.
Look forward to:
Weight: 3.8oz / 108 grams
Fabric: Hat: 98% organic cotton; 2% spandex - lightweight, breathable, sueded for a soft touch and with some give for a comfort fit HyperKewl™ Evaporative Insert: 100% polyester mesh on the outside; interior is 53% polymer fibers; 47% cellulose fibers
Care: Remove HyperKewl™ insert before washing hat. Machine wash hat in cool water, delicate cycle or hand wash; Reshape and air-dry.
How to use your HyperKewl™ Evaporative Insert: Soak the insert in cold water for up to 5 minutes – insert into the Hat. The airflow through the mesh panel will start the evaporative cooling process. The cooling insert is expected to provide temperatures that are approx. 10 to 15 degrees Fahrenheit cooler than ambient temperature depending on airflow. It will not feel like an air-conditioner on your head – it will super charge the natural evaporation process to help you feel comfortable on the trail. High humidity will diminish the fabric’s ability to evaporate water.
Look forward to:
- Maximum sun protection - fabric is certified UPF 50+, the highest given
- An abundance of shade - broad brim protects from both sun and rain
- Keeping cool - the HyperKewl™ Evaporative cooling material absorbs and slowly releases water through evaporation to help ‘super charge’ the body’s natural cooling process
- Guaranteed for life
- 3/4" mesh insert around the top provides extra ventilation
- Front and back wind cords system secures Hat in gusty conditions
- Water-repellent finish keeps off the rain
- Pocket in crown holds the insert and is made with mesh to help increase airflow for maximum evaporation
- Buoyancy – stays afloat in water
- A rear brim loop provides a place to securely clip your Hat in place when not in use
- Made in Canada
Weight: 3.8oz / 108 grams
Fabric: Hat: 98% organic cotton; 2% spandex - lightweight, breathable, sueded for a soft touch and with some give for a comfort fit HyperKewl™ Evaporative Insert: 100% polyester mesh on the outside; interior is 53% polymer fibers; 47% cellulose fibers
Care: Remove HyperKewl™ insert before washing hat. Machine wash hat in cool water, delicate cycle or hand wash; Reshape and air-dry.
How to use your HyperKewl™ Evaporative Insert: Soak the insert in cold water for up to 5 minutes – insert into the Hat. The airflow through the mesh panel will start the evaporative cooling process. The cooling insert is expected to provide temperatures that are approx. 10 to 15 degrees Fahrenheit cooler than ambient temperature depending on airflow. It will not feel like an air-conditioner on your head – it will super charge the natural evaporation process to help you feel comfortable on the trail. High humidity will diminish the fabric’s ability to evaporate water.
